Product Categories

Below are the different Products Categories of this site and links to our sister websites


Below you can find other products from our websites.



Brief History

Powermaster Industrial Supplies all forms of tooling for the boiler, heat exchanger and pressure vessel industry. We also provide heat exchanger and boiler cleaning on-site in Ontario only.

We supply top quality spring tool balancers which can be found in many of North America's automobile manufacturing plants. The latest being the modern Tesla Plant in california.

We source and design quality tooling from all over the world and test this equipment before even considering passing the product to our customers.

Our motto still remains the same to this day,

"What can we Do for You".

Connect with us on:
Connect with us on Facebook. Connect with us on Twitter.

Partners:

SBH Series Spring Tool Balancers

Spring Tool Balancers

Bolting tools

Bolting Tools


Making one connection at a time.

Connecting the Mining Industry worldwide

Boiler Tube Expanders for all types of boilers.


Titles and Pictures are live.


Combination Beading Expander

Combination Beading Expander in 2.0, 2.5 and 3.0 inch. The Combination Beading Expander covers your common sizes and tube thicknesses. This tool saves so much time, money and physical strain on the operator compared to beading with a pneumatic hammer as has been the normal procedure in the past.
Expander comes in 3 OD Sizes 2.0", 2.5" and 3.0".
Tube Wall Thickness 10-13 BWG (0.134"-0.095").


Follow this pdf link for the full specification sheets




114 Series Boiler Tube Expanders

114 Series boiler tube expander series The 114 Series boiler tube expanders roll and flare are mainly used in fire tube boilers and air heaters, they come with 4 straight rollers and 2 flaring rolls. The sizing is from 2.0" to 4.5"OD. Mandrel types are Drum, Header and short series.
We stock standard sizes for 2.0, 2.5 and 3.0"OD.
Tube Wall Thickness 10-13 BWG (0.134"-0.095").


Follow this pdf link for the full specification sheets
114 Series Tube expanders




A Series

A Series straight tube expander When parallel rolling tube, the A Series is the most economical choice where tubes do not need to be flared. Worldwide design which has been time tested. Range from 7/8" to 4.5"OD. Mandrels are Drum, Header or short series.
We stock standard sizes for 1.5, 2.0, 2.5 and 3.0"OD.
Tube Wall Thickness 10-13 BWG (0.134"-0.095").


Follow this pdf link for the full specification sheets
A Series Specification Sheets




AB Series

AB Series tube expanders The AB Series boiler tube expander is the tool for high productivity as an internal thrust bearing reduces friction which therefore reduces a build up of heat within the tool. This then reduces wear. Range is from 7/8" to 4.5"OD. Mandrels are drum configuration only.
Call for Availability Tel: (613) 764-0572.



Follow this pdf link for the full specification sheets




AF3 Series

AF3 series for flaring tubes in boilers. AF3 Series is the expander for flaring tubes with 3 straight rollers and 3 flaring rollers. The design is time tested and is of sturdy construction. With the overlapping of the flare rollers ridging of the tube is prevented. Range is from 7/8" to 4.5"OD. Mandrels are Drum, Header and Short Series.
We stock standard sizes for 2.0, 2.5 and 3.0"OD.
Tube Wall Thickness 10-13 BWG (0.134"-0.095").

Follow this pdf link for the full specification sheets




ABF3 Series

ABF3 series with thrust bearing. The ABF3 is just like the AF3 series, but with the internal thrust bearing which increases the life of the tool in a high productivity environment. Range is from 7/8" to 4.5"OD. Drum mandrels only.
Call for availability: (613) 764-0572.




Follow this pdf link for the full specification sheets




8112 Series

8012 Series A tube expander which comes from the heat exchanger categories but is used more and more in boilers, air heaters and refinery still tubes for its long reach capabilities. Three different models gives this tube expander the capability to reach up to 8.0" on the tubesheet.
Tube Wall Thickness 3 - 18 BWG (0.259" - 0.049").
Call for Availability. (613) 764-0572.

Follow this pdf link for the full specification sheets




P-1000 Series

P-1000 Series for use in limited space for tube expanders. The P-1000 Series is the workhorse in limited spaces where work is being carried out in mud and steam drums. Tubes can be rolled where tubesheets are up to 2.3/4" thick and rolled in one operation. Once again overlapping flaring rollers stop ridging.
Range from 1.0" to 4.5"OD. Drum and Short Series mandrels.
Call for availability: (613) 764-0572.


Follow this pdf link for the full specification sheets




P-3000 Series

P-3000 Series used for tubesheets and drums thicker than 2.3/4 inches The P-3000 series is a tube expander used for tubesheets and drums thicker than 2.3/4". The expander is usually used in conjunction with the P-1000 series. These can be step rolled through the tubesheet to a maximum depth of 5.3/8"Range from 1.1/4" to 4.5"OD.
Drum and Short Mandrels available.
Call for availability: (613) 764-0572.


Follow this pdf link for the full specification sheets




If you require any further information please do not hesitate to contact us:

Tel: (613) 764-0572

Email: sales@powermasterindustrialsupplies.com